RE: [Chrysler300] 1960 Steering gear box

["Michael Reed rmreed@xxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

My mechanic pulled the steering box off my '60 to have it rebuilt. No special tools; no problems.

Don't drop it on your foot though. Took a year for my foot to heal.

Mike Reed in Hastings, Michigan

On Aug 28, 2018, "'David Schwandt' finsruskw@xxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

Pain in the arse, Mick

Procedure in in the FSM

Will need a lot of patience and a “pickle fork” to brake the pitman arm loose from the drag link for starters.

Pulling the steering wheel and column to expose the joint at the bottom between the shaft and the sector.

Got a service manual?

According to the FSM. Special tools are involved.

Check the parts manual as well for an exploded view of the components to get familiar with them.

Why are you needing/wanting to remove it??

Good luck!!

Dave Schwandt

From: Chrysler300@xxxxxxxxxxxxxxx [mailto:Chrysler300@xxxxxxxxxxxxxxx] On Behalf Of Mick Kreszock kreszockcm@xxxxxxxxxxxx [Chrysler300]
Sent: Monday, August 27, 2018 9:21 PM
To: Listsaver 300 Club
Subject: [Chrysler300] 1960 Steering gear box

How difficult is it to remove and replace the steering gear box in a 1960 Chrysler?

[Non-text portions of this message have been removed]

__._,_.___

---

Posted by: Michael Reed <rmreed@xxxxxxxxx>

---

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang

Visit Your Group

• New Members 1

• Privacy • Unsubscribe • Terms of Use

__,_._,___