Re: [Chrysler300] 61 300 G
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] 61 300 G





Two lower holes normally have a nylon insert pressed in. Screw
Goes in to inserts. Top hole has a rubber bumper just to prevent plate rattling.

Sent from my iPhone

On Sep 11, 2018, at 5:50 PM, Val Jeffers edward1108@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

 

   Greetings all,

                    I have possibly a dumb question but I won't let that stop me ! On the front bumper, are there plastic inserts for attaching a license plate or do you simply use a bolt and nut ?

                                                                                                         Thanks,

                                                                                                         Val Jeffers



__._,_.___

Posted by: scooter465@xxxxxxx


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang





__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.