RE: [Chrysler300] Door pillar strikers
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [Chrysler300] Door pillar strikers



Removing  the rear seat ¼ panel will give access to the threads on the back side of the door jamb.

Try some rust penetrant there.

Have you already screwed up the Phillips slot/s ??

If so, try center drilling the screw so the driver will sit deeper.

I probably have some used screws to replace damaged ones assuming you can get them out.

Good luck!

 

From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of Cox Scooter465@xxxxxxx [Chrysler300]
Sent: Monday, February 17, 2020 1:23 PM
To: dave.dumais@xxxxxxxxx
Cc: Chrysler 300 List <Chrysler300@xxxxxxxxxxxxxxx>; bob@xxxxxxxxxxxxx
Subject: Re: [Chrysler300] Door pillar strikers

 



I would try a steel head Phillips screw driver.

Give each screw some

Heavy strikes. It will break

Rust loose from threads

May work.

 

Bob Haag





On Feb 17, 2020, at 12:47 PM, Dave Dumais dave.dumais@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:

   

Need help on the Coupe door pillar strikers.

 

3 Philips head screws, even an impact driver won't crack them loose.

 

Any experience or suggestions?

The door is adjusted for gaps.

But, it will not shut into striker by 3/16.

 

Thanks,

 

Dave

Sent from Yahoo Mail on Android <https://overview.mail.yahoo.com/mobile/?.src=Android> 










[Non-text portions of this message have been removed]



------------------------------------
Posted by: <finsruskw@xxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.