Re: [Chrysler300] Re 14 inch wheels for 1960 Chrysler
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Chrysler300] Re 14 inch wheels for 1960 Chrysler



Really like that input John. 
Confirms it really  happens . Thank you . 
I have heard stories about this cracking , actually very common apparently — among older studebakers . Most studes are ten plus years older than 300.  They say there , at their club, never put radials on the old stude rims, they crack , but they have a “side alley “ problem about tubes vs tubeless thrown into the logic . 
A cracked rim and a tube seems lethal , as no air leak till rim edge breaks off ! 
  
>From a technical perspective , they have to be fatigue cracks possibly initiated by stress risers due to scratches  or tooling marks when it was made .. It is odd ( to me) it is way out at  rim it cracks where stress would be low compared to central part near bolts . Maybe thinner metal or beaten up more at factory in forming round  shapes .Or heat treat , or not .  

And loads there would only be high from “ sporty driving “ around corners ( looking at you John) . 
Where were the failed wheels ? Front ? And about how many miles ? 
Thanks again for this info ,
John  

Sent from my iPhone not by choice 

> On 23 Jul 2020, at 5:04 pm, chesnutt@xxxxxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> Hi Michael,
> 
> 
> 
> I agree with you. In the 1971, I had to replace two of the 14”x 6 1/2”wheels on our 1957 300C which developed cracks in the rim under the bead resulting in a slow leak (7/1/1971 & 12/17/71). We were on our way home from South Dakota by way of Yellowstone Park, in Idaho we aired up several times and then finally had the wheel with tire put in a water tank and found the rim was cracked. Six months later while home another wheel had to be replaced. The 300C had the old belted tires which results in a very hard ride compered to radials.
> 
> 
> 
> John
> 
> 
> 
> From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of 'micke.sundbom' micke.sundbom@xxxxxxxxx [Chrysler300]
> Sent: Thursday, July 23, 2020 12:29 PM
> To: Jamie Hyde <jamie.hyde@xxxxxxxxxxxxx>; VANNICE, M ALBERT <mav4@xxxxxxx>; 'Fern Rivard ' <crc@xxxxxxxxxxxx>; 'Chrysler300' <Chrysler300@xxxxxxxxxxxxxxxx>; nick@xxxxxxxx
> Cc: 'Michael James' <chrysler300f@xxxxxxxxx>
> Subject: RE: [Chrysler300] Re 14 inch wheels for 1960 chrysler
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> Rims are very much a safety aspect.  I find no reason to use 60 year old rims.  If you find new, specially ordered do not hesitate to use these.  
> 
> For those of you who chase old 6.5in 14 wheels dont forget to look at rusty wagon wheels.
> 
> Happy hunting!
> 
> /Michael
> 
> 
> 
> 
> 
> Skickat från min Samsung Galaxy-smartphone.
> 
> 
> 
> 
> 
> -------- Originalmeddelande --------
> 
> Från: "Jamie Hyde jamie.hyde@xxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx> 
> 
> Datum: 2020-07-23 16:24 (GMT+01:00) 
> 
> Till: "VANNICE, M ALBERT" <mav4@xxxxxxx>, 'Fern Rivard ' <crc@xxxxxxxxxxxx>, 'Chrysler300' <Chrysler300@xxxxxxxxxxxxxxx>, nick@xxxxxxxx 
> 
> Kopia: 'Michael James' <chrysler300f@xxxxxxxxx> 
> 
> Ämne: RE: [Chrysler300] Re 14 inch wheels for 1960 chrysler 
> 
> 
> 
> 
> 
> Murray Park has the 14 x 6 ½” wheels in stock as I just spoke to him about them. 
> 
> 
> 
> From: Chrysler300@xxxxxxxxxxxxxxx <Chrysler300@xxxxxxxxxxxxxxx> On Behalf Of 'VANNICE, M ALBERT' mav4@xxxxxxx [Chrysler300]
> Sent: Wednesday, July 22, 2020 8:11 AM
> To: 'Fern Rivard ' <crc@xxxxxxxxxxxx>; 'Chrysler300' <Chrysler300@xxxxxxxxxxxxxxx>; nick@xxxxxxxx
> Cc: 'Michael James' <chrysler300f@xxxxxxxxx>
> Subject: [EXTERNAL] Re: [Chrysler300] Re 14 inch wheels for 1960 chrysler
> 
> 
> 
> 
> 
>  I have one Chrysler wheel, but it is 14' x 6" and not 14" x 6 1/2".
> 
> Al
> 
>  _____  
> 
> From: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300@xxxxxxxxxxxxxxx>  <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300@xxxxxxxxxxxxxxx> > on behalf of nick@xxxxxxxx <mailto:nick@xxxxxxxx>  [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx <mailto:Chrysler300-noreply@xxxxxxxxxxxxxxx> >
> Sent: Tuesday, July 21, 2020 11:55 PM
> To: 'Fern Rivard ' <crc@xxxxxxxxxxxx <mailto:crc@xxxxxxxxxxxx> >; 'Chrysler300' <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300@xxxxxxxxxxxxxxx> >
> Cc: 'Michael James' <chrysler300f@xxxxxxxxx <mailto:chrysler300f@xxxxxxxxx> >
> Subject: RE: [Chrysler300] Re 14 inch wheels for 1960 chrysler 
> 
> 
> 
> 
> 
> Thanks Fern, that was Michael James.
> 
> 
> 
> From: Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300@xxxxxxxxxxxxxxx>  <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300@xxxxxxxxxxxxxxx> > On Behalf Of 'Fern Rivard ' crc@xxxxxxxxxxxx <mailto:crc@xxxxxxxxxxxx>  [Chrysler300]
> Sent: Tuesday, July 21, 2020 8:10 PM
> To: Chrysler300 <Chrysler300@xxxxxxxxxxxxxxx <mailto:Chrysler300@xxxxxxxxxxxxxxx> >
> Subject: [Chrysler300] Re 14 inch wheels for 1960 chrysler
> 
> 
> 
> 
> 
> A few days ago someone posted a want listing for 14 inch steel wheels for 1960 chrysler.
> 
> My friend Scott Dejka called me this evening and said that he had either 2 or 3 or those steel wheels. For some unknown reason, he is not able to post on this site.
> 
> His email info is: inyourjs@xxxxxxxxxxx <mailto:inyourjs@xxxxxxxxxxx> 
> 
> His phone number is 509885-5587
> 
> Cheers from Fern in SE BC where it's very warm today
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> Posted by: <chesnutt@xxxxxxxxxxxx>
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 


------------------------------------
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.