[Chrysler300] 1964 K Remote Brake Booster Vacuum Line and Manifold Check
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Chrysler300] 1964 K Remote Brake Booster Vacuum Line and Manifold Check valve.





Hi to all

I had the remote brake Booster rebuilt and I am in the process of re installing. It only makes sense to also replace the vacuum line and check valve from the manifold as I can only guess how old they are. Original?  In reviewing past club news letters I ran across a tech article in Newsletter #20 from 2015. It is stated that a Dorman #80190 can be used in place of the original check valve and shows the 1/2 inch side of the check valve for the line going to the booster. So I purchase the valve and 6 ft of 1/2 line without double checking what I took off. Now that I am out trying to get this all together it looks like the original check valve stems (both of them) and the booster inlet is 3/8. The article did not mention having to do any modifications. The only original hose that is 1/2 inch at the booster is the hose to the filter under the battery tray. Has anyone else had to replace the check valve? If so what did you use?  Thanks in advance

Mike Cortel


__._,_.___

Posted by: Mike Cortel <toy72456@xxxxxxxxx>


To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang




Visit Your Group
Yahoo! Groups
PrivacyUnsubscribeTerms of Use

__,_._,___


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.