Re: [Chrysler300] Wiring Harness

["John Grady jkg@xxxxxxxxxxxxxxxxx [Chrysler300]" <Chrysler300-noreply@xxxxxxxxxxxxxxx>]

Just went through this , unless the large wires (10-12 ga) in main harness are burned , it is much better to fix up / repair yours. Hard to find now..  for 300. 
In particular , power window harness is unique to 300 F ,G ,h . Greg leggatt used to make them , but has stopped . 
Possibly from a parts (300 only  ) car ; minor differences FGH , can be used . 
I have a car (F) which came  with no main or PW harness ,it had  two 300 main harness and one NY er and one destroyed burned F one that came with  it , all had all been  cut at firewall , unbelievably dumb thing to do , was able to fix , but a week of work , got one eventually out of all this . . Had to buy colors of wire ,to run through firewall ,  use ends from various cars , will work fine , but not stock .  . Soldered and shrink sleeved the joints . 
I guess depends on goal for  car too . Restoration or drive . Big fan of adding limiter link at main feed to avoid ever burning up harness . Not a pretty thing when that happens. Main area  for shorts that do that , is at circuit breakers in kick panel , large power wires there can cut on sharp edges of sheet metal holes if not dressed carefully away from sharp edges . Sometimes just carelessly stuffed in , not good. . Several heavy wires there are Unfused off  battery . Another bad place is at ignition switch . Plug and tail are often replaced , wires just twisted and taped . Just sharing what I have seen on this .. good luck, 
John 

Sent from my iPhone not by choice 

> On 17 Aug 2020, at 6:12 pm, Claudio Grisolia grisolia11@xxxxxxxxx [Chrysler300] <Chrysler300-noreply@xxxxxxxxxxxxxxx> wrote:
> 
> I need help locating a wiring harness for my 300F. New preferred.... 
> Thanks in advance
> 
> Claudio Grisolia
> 
> Sent from my iPad
> 
> 
> ------------------------------------
> Posted by: Claudio Grisolia <grisolia11@xxxxxxxxx>
> ------------------------------------
> 
> To send a message to this group, send an email to:
> Chrysler300@xxxxxxxxxxxxxxx
> 
> To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
> go to https://groups.yahoo.com/neo/groups/all/manage/edit
> 
> For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm
> 
> For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 


------------------------------------
Posted by: John Grady <jkg@xxxxxxxxxxxxxxxxx>
------------------------------------

To send a message to this group, send an email to:
Chrysler300@xxxxxxxxxxxxxxx

To unsubscribe from this group, send an email to bob@xxxxxxxxxxxxx or
go to https://groups.yahoo.com/neo/groups/all/manage/edit

For list server instructions, go to http://www.chrysler300club.com/yahoolist/inst.htm

For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Chrysler300/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Chrysler300/join
    (Yahoo! ID required)

<*> To change settings via email:
    Chrysler300-digest@xxxxxxxxxxxxxxx 
    Chrysler300-fullfeatured@xxxxxxxxxxxxxxx

<*> To unsubscribe from this group, send an email to:
    Chrysler300-unsubscribe@xxxxxxxxxxxxxxx

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/