{Chrysler 300} 300F Rear panel trim clips

[Nick Taylor <nicksgaragesd@xxxxxxxxx>]

I had the rear bumper redone for my F and before I install it, I'm replacing the chrome around the license plate pocket and the two stainless moldings on either side of it. I got an NOS one for one side and it came with new clips. Three squeeze clips and one screw on one. Looking at my car, it has nuts holding on the original molding. Which way is correct?

Doesn't really matter to me but a friend is restoring his F where he's missing most of the clips and screws for everything on it.

-- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/8d9ca2d8-0cf1-4865-9b56-b3e009f425d4n%40googlegroups.com.

Attachment: 2196655_rear_panel_mdg_clips.jpg
Description: JPEG image