RE: {Chrysler 300}

I hope I don’t screw things up here but the hood letters on my C are press in. There is a rectangular barbed clip that presses into the rectangular hole in the hood, then the letter presses into the clip. Attached is a bad photo of the clip; the left pair of clips are from Gary Goers (Quirey), the right pair is the original pair of clips, and third item in the photo is the “S” turned upside-down to show the tab that gets inserted into the clipped rectangular hole in the hood.

P.S. I daubed just a tiny bit of contact cement (or maybe JB weld) on the back of the letter when I inserted it to make sure I don’t lose the letter to the bugs or the wash cloth.

Henry

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Marshall Larson
Sent: Saturday, May 08, 2021 10:12 AM
To: 300 club <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300}

Who has the rectangular nuts that hold the (CHRYSLER) letters on 57 to 59 hoods? Checked Goers catalog with no success unless I missed them.

Marshall Larson

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNTSdmxM-SBFFuedfT7ce5RoTK%3DsVGob1V9PGefsXTdpPg%40mail.gmail.com.