{Chrysler 300} Valve spring specs 57c
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Valve spring specs 57c





Hello
 300 world,  I have a delicate question regarding valve springs for my 57 300c engine.  I am in full swing renovating cylinder heads.  We put in all new guides and valves etc. A problem we feel after having measured the spring pressure on the new springs and compared to the tired originals.  We find that the pressure is tremendously great with the ones we have had from Hot Heads,, they probably have others but these I have been recommended. 
  I absolutely do not want to kill my cam lobes. Therefore, I am looking for specification of lbs spring pressure and at what length of spring travel.  
 My new springs are the inner and outer type..Before we move on im glad for any input regarding specs , brand part nr with springs close to the originals. 
  Hope you understand my technical Donald Duck language .. input is welcome.

Thanks
Michael

Skickat från min Galaxy

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/60a69d2f.1c69fb81.8ef02.1e4b%40mx.google.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.