Re: {Chrysler 300} 300G interior advise...

[RICHARD HUSS <rhuss214192@xxxxxxxxxxx>]

I am sitting with the same issue. I wanted to do this myself but can’t figure out how to do it. lets hope for a good answer.

On Aug 9, 2021, at 3:41 PM, 'chris nielsen' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Has anyone else done this at home alone? Trying to replace my 61 300G interior foam with new stuff from Quirey Quality Design and wondering if I have to cut the opening in the new foam to match the original so the steel rods can be attached to the frame in the back w hog rings? All advise is most appreciated. Thanks in advance.

Sincerely, Chris Nielsen

310-709-5561

http://thestuntdriver.com

SFstunts.com

http://teamhutchinson.com

www.iaction.tv

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/636226723.459010.1628538075541%40mail.yahoo.com.
<Screen Shot 2021-08-09 at 12.20.01 PM.png>

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/EAD7CB8C-7ADB-47EF-8742-D46B8E4A562C%40comcast.net.