{Chrysler 300} 64 K horn contact ring
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 64 K horn contact ring



Can anyone suggest what material to use to replace the gray bedding material under the horn contact ring on the steering wheel? It was mostly rock hard and brittle, but one portion still had some pliability.

 

Anyone have a horn switch to sell - #1972 391? I now find mine was bent up.

 

Also, has anyone been successful converting the turn signal/rear lamps to LED? Which flasher did you use?

The one that they promised would work-doesn’t! Will 1157’s work with the stock flasher OK?

 

Thanks,

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/018101d7b0cc%2490928f60%24b1b7ae20%24%40comcast.net.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.