Re: {Chrysler 300} 300g exhaust muffler
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 300g exhaust muffler



I ordered a system from Waldrons for our 64 300 and got aluminized pipes and stainless mild imposter mufflers.  Haven’t hooked it all up yet though.  Sounds like of the muffler choices (mild imposter or oem) that the oem may be the better choice.  Not sure the difference but will change them if needed.   Do folks have any feedback for 2” vs 2-1/4” pipes in terms of sound?  

Respectfully 
dave

Sent from my iPhone

On Oct 28, 2021, at 8:39 AM, Michael Marmorale <michael@xxxxxxxxxxxxx> wrote:

 Thanks for the advice.  I ordered the regular aluminized pipes with the oem mufflers.   

From everyone’s feedback the oem is what I’m looking for.  

Michael Marmorale

Sent from my iPhone
Please excuse errors.  

On Oct 28, 2021, at 7:21 AM, dplotkin <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:


Stainless is ok for a custom system built  beside the car. But building a Stainless system off site, from a pattern to fit a 61 year old car in which a lot has happened will present fitment issues. Stainless is harder to bend too.
Waldron trys hard to make you happy, but we must remember that we know more about these cars than Waldron does, so we have to be prepared.



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: Nick Taylor <nicksgaragesd@xxxxxxxxx>
Date: 10/27/21 11:10 PM (GMT-05:00)
To: dplotkin <dplotkin@xxxxxxxxxxxxxxxxxxx>
Cc: Michael Marmorale <michael@xxxxxxxxxxxxx>, Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300g exhaust muffler

Did you get correct tailpipes from Waldron's for the F?

On Wed, Oct 27, 2021, 11:33 AM <dplotkin@xxxxxxxxxxxxxxxxxxx> wrote:

I've used classic exhaust and Waldron's. I always go with bone stock and check to be sure its right. I never use stainless steel. When I ordered my system for my F from Waldron they insisted it used resonators. I said no it does not, that is where the 300 gets its throb. They had a New Yorker spec. I sent them the shop manual and supplement pages so they have them now. 

 

I would advise against anything more than stock mufflers. Too much from the rear will drown out the mighty induction roar up front.  

-----Original Message-----
From: "Nick Taylor" <nicksgaragesd@xxxxxxxxx>
Sent: Wednesday, October 27, 2021 12:38pm
To: "Michael Marmorale" <michael@xxxxxxxxxxxxx>
Cc: "chrysler-300-club-international@xxxxxxxxxxxxxxxx" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} 300g exhaust muffler

I went with the stock sound mufflers from Waldron's on my 300F. You definitely know there is something under the hood. The biggest problem is the fit of their parts. First they sent me the wrong tailpipes. When I complained they said there was something wrong with my car. I sent them all kinds of documentation and measurements and pictures of my old original tailpipes fitting perfectly connected to the rest of their parts. Eventually they sent me new tailpipes that look correct but still don't fit because of the bends over the axle. I still have my original tailpipes on the car until I can get it to an exhaust shop for fix. I don't know if the 300G ones are any better. Here are pictures of my exhaust. https://photos.app.goo.gl/3HUfUd2UiKj2kjee7. The head pipes are stainless steel and were acquired from the club by a previous owner who installed them. The Waldron's parts are also stainless but different type. They told me the type the club used is wrong for exhaust. we had to bend them to get them aligned properly with the new exhaust pipes.
BTW, the exhaust system on a 300 uses pretty small diameter pipe. Waldron's will increase the diameters for you but won't guarantee they will fit the car.

On Wed, Oct 27, 2021 at 8:38 AM Michael Marmorale <michael@xxxxxxxxxxxxx> wrote:
Thanks for the tips on the ps box.  I have another question on mufflers. I’m ordereing and exhaust from Waldrons for the g.  I’m not sure to go with the oem or mild-imposter muffler. 

Has anyone had any experience with either one or a sound clip.    I’m looking for a nice sound without a drone not too loud but I still want to know there is something under the hood.   

Thanks mike

Michael Marmorale

Sent from my iPhone
Please excuse errors. 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/71B0486E-F557-4EEB-A388-852BC1A44768%40marmorale.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNPBfEN60WFJTazPWED27Bb-De_7vTNM6htS_Wg4qdwfg%40mail.gmail.com.



 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFNHu-THdqis58NMJeQbbN6HTv%2ByKNVz%3DwuNqekTGqcSsA%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/617a87d0.1c69fb81.2f914.1f4cSMTPIN_ADDED_MISSING%40gmr-mx.google.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/19E5B0C5-A2C7-4BD8-A77B-165031B81AC9%40marmorale.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/E2572ED9-9487-4383-98BD-1625AAAD4D4C%40gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.