Re: {Chrysler 300} 300K exhaust manifold gaskets

[Cox Mail <scooter465@xxxxxxx>]

No exhaust manifold gaskets. 

Bob Haag

On Oct 29, 2021, at 3:04 PM, apozdol@xxxxxxxxxxx wrote:



So I had some cracking noises develop at start up when cold and sure enough, I found the manifold nuts barley tight both sides, and no gaskets. Somebody was playing here. Manual says 30 ft/lbs torque for the nuts.

 

I searched the parts book and it is a little vague to me. Do the single carb 360HP engines use exhaust manifold gaskets, or not? The parts book calls for them for the ram and hemi engines.

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/014301d7ccf7%24d8f21090%248ad631b0%24%40comcast.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/68965C03-EDC4-415C-AC42-1C00A741B6AF%40cox.net.