Might anyone have a gauge tester C-3826 that you may loan out , with a deposit of course? I had my “new” leaking gas tank repaired and sealed and installed a new sending unit after seeing this one which the PO had customized. Had to share, too funny! I now guess he may have done so because of the fuel gauge malfunctioning. It never worked correctly as you can imagine with the fuel reading being lower than the actual fuel in the tank. Now with the new sending unit, my gauge still reads low! I put five gallons of gas into the tank and the gauge barely reads above E, reading low just like before. I bounced the rear end a bunch of times, no change. I will try a slip on ground clip on the tank in a bit, but I sure would like to check each component for prescribed resistance. Does the gas gauge have any adjustments, or is it just resistors? Allan For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/006101d821af%24017b97a0%240472c6e0%24%40comcast.net. |
Attachment:
Resized_20220207_141647.jpeg
Description: JPEG image
Back to the Home of the Forward Look Network
Archive Sitemap
