Re: {Chrysler 300} Fouled Carb, Chapter 2

[RON WATERS <ronbo97@xxxxxxxxxxx>]

Ron K -

Were there any traces of foreign substances in the glass bowl fuel filter attached to the carbs ?

Ron

On 04/25/2022 4:53 PM Ron Kurtz <mark6268@xxxxxxxxxxxxx> wrote:

Hello, Everyone:

I disassembled the carb after letting it sit for a day to help dry it out. Upon disassembly I found what you see in the photo. The fuel filter appeared to be clean from the outside looking but will remove it and cut it open to see what's inside. I pushed a wooden slat into the tank through the filler and found a gel-like substance on the tip. The next step is to drain and remove the tank.

Did anyone else have a similar experience? Any tips?

The carb is a 3614S.

Best,

Ron Kurtz

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/148710490.3360436.1650986131214%40connect.xfinity.com.