{Chrysler 300} Fouled Carb, Chapter 2
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Fouled Carb, Chapter 2



Hello, Everyone:


I disassembled the carb after letting it sit for a day to help dry it out. Upon disassembly I found what you see in the photo. The fuel filter appeared to be clean from the outside looking but will remove it and cut it open to see what's inside. I pushed a wooden slat into the tank through the filler and found a gel-like substance on the tip. The next step is to drain and remove the tank.

Did anyone else have a similar experience? Any tips?

The carb is a 3614S.

Best,
Ron Kurtz

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1645315858.945914.1650920034283%40mail.yahoo.com.

Attachment: DSC04413.JPG
Description: JPEG image



Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.