RE: {Chrysler 300} Tie Rod ends
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: {Chrysler 300} Tie Rod ends



Agreed and I’m not sure a steering box rebuild always includes replacement of the major mechanical gears when needed.  Are these gears actually available new?

 

Rich Barber

 

 

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Cox
Sent: Thursday, August 4, 2022 2:29 PM
To: Gary <garythepartsdoc@xxxxxxxxxxxx>
Cc: Bob Podstawski <bobp8@xxxxxxxxxxxxx>; gary hitchins <garyhitchins@xxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Tie Rod ends

 

Steering box's wear.

The sector shaft adjustment

Usually does not remove play

In my past experience.

 

Bob Haag



On Aug 4, 2022, at 2:45 PM, Gary <garythepartsdoc@xxxxxxxxxxxx> wrote:



If gear box is not leaking, no need to rebuild, backlash is adjustable. See you service manual.

 

Gary

 

From: Bob Podstawski

Sent: Thursday, August 04, 2022 9:51 AM

To: Cox

Cc: gary hitchins ; Chrysler 300 Club International

Subject: Re: {Chrysler 300} Tie Rod ends

 

Before you invest mucho dinero in a box rebuild, have you checked the pitman arm? The steering arm at the box? The center link ends??

Jus sayin….

Bob

C300

300D



On 4 Aug 2022, at 11:31 AM, Cox <scooter465@xxxxxxx> wrote:

eBay vendors are bad or good on fitment issues.

Thei should be no difference

In tie rod ends based on engine size. Possibly different

From long wheel base to

Short wheelbase IE New Yorker. If you can find MOOG

I would go with that and stay

Away from China junk.

Bob Haag



On Aug 4, 2022, at 10:19 AM, gary hitchins <garyhitchins@xxxxxxxxx> wrote:



Hello All, 

 

I'm experiencing what I think is excessive steering play in my '62 300 sport.

 

Current plan of attack is to have the steering gear rebuilt by steer and gear in Ohio, and to replace at least the outer tie rod ends, as minor play is evident.

 

Does anyone have a source for tie rod ends? In searching for tie rod ends, there seems to be a difference for the tie rod ends based on which engine was originally optioned, which in my case would be a 413, can someone also confirm this? I found one source on ebay that has them listed for the 383, but not for the 413.

 

Thank you all in advance for any assistance you can provide.

--

Gary O. Hitchins Jr.
724.216.4299

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CAP%3D-F5NHZ8EUrHm__8DBM7-Gm0b001dVztyYDundxfq-rOTfzw%40mail.gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/457D16FD-45BA-4BBD-8327-2B6EA2279996%40cox.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F6102161-4ABA-44CB-9F12-14B443F8D0BA%40optonline.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/D4A7DDD8-D5A1-417B-B21C-5F3A9A704EFC%40cox.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/019101d8a851%241fd093d0%245f71bb70%24%40ez2.net.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.