{Chrysler 300} F Manifold

[93saturnfan <93saturnfan@xxxxxxxxx>]

Well I received a call from the welding shop I took my broken manifold to today. They were able to weld it together but upon striking it with a hammer to make sure it held, it cracked again. Then the welder suggested I use JB weld to fix it. I don't know if it cracked along the weld or elsewhere as I haven't seen it yet but I plan on picking it up tomorrow and taking my business elsewhere. 

Does anyone in the Midwest or Southeast Wisconsin area have any recommendations of a welding place that can handle a cast iron manifold? 

Thank you in advance.

Ryan Stevenson 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/62f43782.020a0220.8fe4f.a944%40mx.google.com.