{Chrysler 300} 1962 300-H Pass Exh. Manifold

["'Matt Allyn' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Questions about the factory high performance passenger side exhaust manifold….

I think the part # for the super rare passenger side exhaust manifold is 2268-250.

It has that raised port on the top of the rear section.

It is where the rear carburetors choke heat tube exits & travels up to the choke.

Questions (since it seems impossible to locate these manifolds):

- Does the manifold port supply nothing more than heat? (Not an open hole in the manifold, right?  No exhaust gasses pass through here; right?)

- Is it possible to take a non-high performance exhaust manifold & create / weld this port on top of one?  (I know; crazy, right?  But what else does one do?)

Thanks

Matt Allyn

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F07489DC-8704-4C62-BD43-74EB260BCCDF%40yahoo.com.