Re: {Chrysler 300} 62 parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 62 parts



Here is the club tunk page for the 300H but doesn't show jack and spare. Maybe people can contribute to it.

300H Trunk (chrysler300club.com)

Here's the parent page for that with the other years. Chrysler 300 trunk main page (chrysler300club.com)

On Tue, Sep 20, 2022 at 2:10 PM Drew Carl <drew@xxxxxxxxxxxx> wrote:

Funny you say that because that is the exact reason my uncle gave me when I asked him why he didn’t get an H. The car was never a daily driver, it was a road trip and pleasure car and has made trips coast to coast. That is a good idea. I have not been able to find much for images of trunks on these. I went through this with my other uncles 57 Dodge and it seemed I could find a lot of images online of the proper trunk arrangement for it. I am very relived to find these wheels are probably correct. Especially since very few cars would have had these wheels. Can anyone tell me how to date code the wheels? When I have the tire changed for the spare I can see if that lines up.

 

From: Nick Taylor [mailto:nicksgaragesd@xxxxxxxxx]
Sent: Tuesday, September 20, 2022 4:06 PM
To: Drew Carl
Cc: Chrysler list server
Subject: Re: {Chrysler 300} 62 parts

 

All the wheels would match. Did you try turning the wheel face down so that the tabs aren't in the way. It seems there were quite a few sports equipped closer to an H. Perhaps people wanted a letter car but not be limited to 4 seats.

 

On Tue, Sep 20, 2022, 12:15 PM 'Drew Carl' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Wow that is very interesting. Mine has the tabs on all wheels. This car is a sport not an H. When my uncle ordered it with the 413 the dealer came back a few weeks later and said that with the 413 upgrade he had to upgrade the wheels and they would have to charge him extra for the 15 inch (letter car) hubcaps. I assumed this also meant bigger brakes or suspension. But I still find it hard to believe the spare would have had those tabs, though it is the spare he has in the trunk. He had many cars, and a huge hoard of parts so I was just assuming the wheels where swapped around at some point for some reason. Maybe in reality these wheels are correct then. But I still have a hard time with the spare being that way because it doesn’t accept the jack base as a hold down very well. I welcome anyone’s input on this.

 

From: Joe Williams [mailto:jfwilliams2007@xxxxxxxxx]
Sent: Tuesday, September 20, 2022 1:59 PM
To: Drew Carl; Cox
Cc: Chrysler list server
Subject: Re: {Chrysler 300} 62 parts

 

Hi Drew,

       The 62 Sport could be ordered with either 14" or 15" wheels.  I think the 15" wheels were part of a heavy duty suspension package that matched the 300H.  The 15" wheels are 6" wide and some (I'm told not all.) had the hubcap tabs.  My 62 Sport has them and came with the hubcaps that say 300 in the center (which don't use those tabs at all).  

Good luck,

Joe

 

On Tuesday, September 20, 2022 at 01:20:57 PM EDT, Cox <scooter465@xxxxxxx> wrote:

 

 

Try Murray Park he may

Have what ya need.

Bob Haag

 

On Sep 20, 2022, at 11:24 AM, 'Drew Carl' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



Thank you all for a lot of help in figuring out a lot on the parts I am looking for. I am down to needing a proper spare wheel, and bumper jack, and I would sure like to set of proper manifold bolts though I don’t think that will happen. Joe Williams was able to help me figure out that the bumper jack hook should be 2204073 but of course I do not have that hook somehow and I don’t even have a jack that would be correct. I found someone on ebay selling jacks they claim to be new but they do not have the correct hook.

 

Does anyone know what a proper wheel should measure in width? I assume it should measure 6.5 inches. My spare has prongs riveted to the center to hold a center cap so I know this is not correct. The only other option I have here is a 7.5 inch wide wheel which I believe is too wide. I am going to call a few places and try to find a wheel and bumper jack today. Big M, Moore, and Benny Buckner in WV are the places I know of to call.  Any help is appreciated.

 

<image002.jpg>

Drew Carl
Owner, eScore 

Phone: 724-288-6636

Email: drew@xxxxxxxxxxxx

Website: www.escoremx.com

Address: 1280 Henderson Avenue Washington, PA 15301

 

 

 

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/106101d8cd05%241705db60%2445119220%24%40escoremx.com.

 

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit

https://groups.google.com/d/msgid/chrysler-300-club-international/CFFD6F11-AC36-4BA7-B84E-466507E024CF%40cox.net

.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/10c601d8cd25%244dc352c0%24e949f840%24%40escoremx.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CA%2BjApFPXnU91hFbhY-6Z9BXdL3yqV5TcBZqBCNbNddST-KW6mQ%40mail.gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.