Re: {Chrysler 300} 62 parts
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 62 parts



Spare wheels and tires always matched the other 4 wheels. They didn't use space saver spares back then. Yours are correct.
Don


-----Original Message-----
From: 'Drew Carl' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
To: 'Joe Williams' <jfwilliams2007@xxxxxxxxx>; 'Cox' <scooter465@xxxxxxx>
Cc: 'Chrysler list server' <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Tue, Sep 20, 2022 3:15 pm
Subject: RE: {Chrysler 300} 62 parts

Wow that is very interesting. Mine has the tabs on all wheels. This car is a sport not an H. When my uncle ordered it with the 413 the dealer came back a few weeks later and said that with the 413 upgrade he had to upgrade the wheels and they would have to charge him extra for the 15 inch (letter car) hubcaps. I assumed this also meant bigger brakes or suspension. But I still find it hard to believe the spare would have had those tabs, though it is the spare he has in the trunk. He had many cars, and a huge hoard of parts so I was just assuming the wheels where swapped around at some point for some reason. Maybe in reality these wheels are correct then. But I still have a hard time with the spare being that way because it doesn’t accept the jack base as a hold down very well. I welcome anyone’s input on this.
 
From: Joe Williams [mailto:jfwilliams2007@xxxxxxxxx]
Sent: Tuesday, September 20, 2022 1:59 PM
To: Drew Carl; Cox
Cc: Chrysler list server
Subject: Re: {Chrysler 300} 62 parts
 
Hi Drew,
       The 62 Sport could be ordered with either 14" or 15" wheels.  I think the 15" wheels were part of a heavy duty suspension package that matched the 300H.  The 15" wheels are 6" wide and some (I'm told not all.) had the hubcap tabs.  My 62 Sport has them and came with the hubcaps that say 300 in the center (which don't use those tabs at all).  
Good luck,
Joe
 
On Tuesday, September 20, 2022 at 01:20:57 PM EDT, Cox <scooter465@xxxxxxx> wrote:
 
 
Try Murray Park he may
Have what ya need.
Bob Haag


On Sep 20, 2022, at 11:24 AM, 'Drew Carl' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:

Thank you all for a lot of help in figuring out a lot on the parts I am looking for. I am down to needing a proper spare wheel, and bumper jack, and I would sure like to set of proper manifold bolts though I don’t think that will happen. Joe Williams was able to help me figure out that the bumper jack hook should be 2204073 but of course I do not have that hook somehow and I don’t even have a jack that would be correct. I found someone on ebay selling jacks they claim to be new but they do not have the correct hook.
 
Does anyone know what a proper wheel should measure in width? I assume it should measure 6.5 inches. My spare has prongs riveted to the center to hold a center cap so I know this is not correct. The only other option I have here is a 7.5 inch wide wheel which I believe is too wide. I am going to call a few places and try to find a wheel and bumper jack today. Big M, Moore, and Benny Buckner in WV are the places I know of to call.  Any help is appreciated.
 
<image002.jpg>
Drew Carl
Owner, eScore 
Phone: 724-288-6636
Address: 1280 Henderson Avenue Washington, PA 15301
 
 
 
 
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/106101d8cd05%241705db60%2445119220%24%40escoremx.com.
 
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/10c601d8cd25%244dc352c0%24e949f840%24%40escoremx.com
.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1456784657.313562.1663713697305%40mail.yahoo.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.