Re: {Chrysler 300} 300g steering column

["'Donald Verity' via Chrysler 300 Club International" <chrysler-300-club-international@xxxxxxxxxxxxxxxx>]

Michael,

There is a snap ring that goes on top of that washer. You have to pull up the shaft against the spring pressure to install the snap ring. It's not an easy task. 

Don

Hi all.  Im having a hard time installing the steering column in my 300g.  I have the box in the wedge adjusted and the coupling all together.   I have the snap ring spring washer and cone washer on the column. The part that is tripping me up is the top of the column where the wheel attaches.  I can’t get it snug, the shaft moves side to side.  It was like this before I took it apart too. I think I’m missing a part.   The pics of what I have are below.  Any thoughts? 

Thanks mike 

Michael Marmorale

Sent from my iPhone

Please excuse errors.  

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CDB1E387-90AA-496E-A77B-ED1D8A7D2848%40marmorale.com.

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/241598653.1658470.1665959136515%40mail.yahoo.com.