{Chrysler 300} 300g steering column
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} 300g steering column



Hi all.  Im having a hard time installing the steering column in my 300g.  I have the box in the wedge adjusted and the coupling all together.   I have the snap ring spring washer and cone washer on the column. The part that is tripping me up is the top of the column where the wheel attaches.  I can’t get it snug, the shaft moves side to side.  It was like this before I took it apart too. I think I’m missing a part.   The pics of what I have are below.  Any thoughts? 

Thanks mike 

image0.jpegimage1.jpegimage2.jpeg

Michael Marmorale

Sent from my iPhone
Please excuse errors.  

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CDB1E387-90AA-496E-A77B-ED1D8A7D2848%40marmorale.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.