{Chrysler 300} 64 K two door stainless trim

[<apozdol@xxxxxxxxxxx>]

Not sure if this also fits 4 doors or 63’s, but might anyone have a spare of this little drivers side corner trim piece? The trim shop that installed my headliner somehow bent this part upward, and my straightening effort proved unsuccessful.

It was glued on and then held fast by the rear rail trim which is held on by two screws, these hidden under the roof rail.

 

And they dented the stainless rail trim.

To reduce any further damage, can anyone share if this trim best pops off at the bottom, or the top? I see on YouTube U that some use an aluminum can opener to carefully pull up from the bottom, and then find a guy that makes a similar plastic tool for BMW’s that pull off from the top.

 

Allan

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/00e701d90e70%24d3c1f4d0%247b45de70%24%40comcast.net.

Attachment: 20221212_145527_resized.jpg
Description: image/