{Chrysler 300}

[Marshall Larson <granitledge@xxxxxxxxx>]

This is how I dealt with the copper pipes at the thermostat housing on my G. That area is, as you likely know, very congested. I used what fittings I had on hand for the thermostat connection rather than going shopping for fittings to make them the same. 

I twisted the driver's side pipe slightly to achieve a smoother transition to the heater core. Other than that they fit perfectly.

--

Marshall Larson

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CACuDFNR%3Dt2Snqd8FSHPVQyEnxV_NXaEy%2BKujigWR%3D5ztx5DQKg%40mail.gmail.com.

Attachment: IMG_1932.JPG
Description: JPEG image

Attachment: IMG_1934.JPG
Description: JPEG image

Attachment: IMG_1935.JPG
Description: JPEG image

Attachment: IMG_1936.JPG
Description: JPEG image