{Chrysler 300} Oil Filter Gasket
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} Oil Filter Gasket



Help John and Bob,

I recently replaced the oil filter on my B and it is leaking from the top where the nut is. The service manual doesn’t show a gasket there. Should there be some sort of gasket other than the one that connects to the block. 

Also is there an easier way to get the filter on and know that the bottom gasket is lined up correctly other than struggling through the engine bay? 

I have a spin on filter adapter but I can’t loosen the bolts with the space available around the connector. I’ve been trying to avoid using impacts and power tools because I don’t want to break anything. Should I tempt fate or would removing the wheel well be the best path forward. 

Any insight would be greatly appreciated.  

Thanks
Zach Hietsch

-- 
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- 
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/F33A084C-32AA-488A-8AB8-FFCD03F6D392%40gmail.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.