Re: {Chrysler 300} 300B wire harness recommendations

Justin,

I replaced all four looms in our 300B when doing the body off rest. Source was YnZ and their products are good and very much like original right down to the color codes. I also used them when restoring our 1955 Imperial Newport.

Our '55 NYer T&C has a Rhode Island loom in it and also has given excellent service. Color codes are once again very close to original.

Last time I checked RI was a bit less costly, but it is up to you as you will only do it once.

John Lazenby

On Monday, August 28, 2023 at 08:59:34 AM PDT, Justin I <captjj28@xxxxxxxxxxx> wrote:

Hi Club,

There has been a rash of wiring related fires in the classic car circles that I associate with, so I figure it's time to stop tempting fate.

I found a few recos in the ForwardLook discussion forums, but I can't seem to figure out how to search the 300 listserver archives. The two outfits I've found so far are:

YnZ's Yesterday's Parts

Rhode Island Wiring Service Inc.

Does anyone have first hand experience with either of these vendors, or are there other recommendations? I do not have a "show" car, but I'd like something that is plug-n-play (mostly) and something that looks more/less original (cloth covers). Please let me know!

-Justin in PA

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/DM4PR05MB943966380E34C0727FF7DB31C3E0A%40DM4PR05MB9439.namprd05.prod.outlook.com.