{Chrysler 300} RE: lower control arm bushing - Problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

{Chrysler 300} RE: lower control arm bushing - Problem



Anyone with any ideas short of milling the bore open?

 

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Monday, October 2, 2023 15:33
To: Chrysler 300 List Server (chrysler-300-club-international@xxxxxxxxxxxxxxxx) <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} lower control arm bushing - Problem

 

Hi All,

 

This hobby is getting less fun as more and more of the simple things are becoming a whole day affair.

 

I went to press in my lower control arm bushings on the ’64 and they will not go.

 

The control arms are all bead blasted, painted and ready to go save putting in the lower control arm bushing and its associated big pin. I tried to use the press and right away it did not feel correct. I pulled it out and tried it by hand with a hammer to get it started and it still did not want to go in.

 

I have the Chrysler – Miller special tool for it.

 

I then measure the bore on both control arms, and they are 1.502 to 1.503 in diameter. I then measure the bushing and it is 1.518 to 1.520 inch. The difference is over .015 inch!

 

I would expect .002 to .004 at the most for an interference fit. But 0.015 inch? It will never go in.  WTF?

 

Of course, if I got back to the seller of the front-end kit, I would get the, “…I have never had anyone complain…”  horse dung.

 

Anyone recently do lower control arms on a ’63 or ’64 and have a manufacturer and part number that works?

 

Thanks, James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171104B7C89B00C065697D993C5A%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61715FE1AC6057AA1A85F55993CBA%40CY5PR19MB6171.namprd19.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.