RE: {Chrysler 300} Brake fluid

["Ron Waters" <ronbo97@xxxxxxxxxxx>]

If you currently have DOT 3 and there are no problems (leaks, etc), then leave everything ‘as is’. Don’t tempt fate by changing over just because some newsletter told you to do so.

 

Ron

 

From: mguarneri via Chrysler 300 Club International
Sent: Thursday, October 05, 2023 3:39 PM
To: chrysler-300-club-international@xxxxxxxxxxxxxxxx
Subject: {Chrysler 300} Brake fluid

 

I just saw this article (see below) in the latest Rock Auto newsletter.  And not wanting to do something that would cause break, I mean brake failure, would I be safe to say if I replaced (complete flush) Dot 3 with Dot 5.1 in my G, I would not be compromising safety?

 

John

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/1361763691.11843253.1696534762565%40mail.yahoo.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/000901d9f7d1%2411e4e7a0%2435aeb6e0%24%40comcast.net.