Re: {Chrysler 300} 1957 300C power steering pump
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} 1957 300C power steering pump



Hi All,

I have the kit to rebuild the Thompson pump. The trickiest part of the rebuild is aligning the 9 rotating sleeves. It is not an impossible task, take a deep breath and make sure your wife did not just kick you out of house. Kit includes, precision shaft bearing, steel cased lip seal. internal ring seals, large canister seal, instructions. Also, always follow your service manual instructions. $55 + shipping at cost. NO CHINESE PARTS.

Gary The Parts Doc



-----Original Message----- From: Rob Kern
Sent: Saturday, October 21, 2023 6:30 PM
To: chrysler 300 club
Subject: {Chrysler 300} 1957 300C power steering pump

Hello 300’ly to all!
Mixed bag here folks with 300 C’s needing a power steering pump. This is a one year only style pump which is different from the D pump and the Vickers pump on Dodge and DeSoto for 1957. Much to my surprise Advance Auto Parts, Carid, and Rock Auto advertise having this pump! They are remanufactured pumps by Lares. They sell for close to $300 with a core pump valued at close to $600. Without a core for Advance it is close to $900. Mixed bag in my estimation from a substandard rebuild of my Thompson pump in 2005 by Lares. Perhaps there is a marked change a foot on the Lares remanufactured pumps now? It sure would be nice. The price includes the reservoir and pulley. There is a warranty by the Advance Auto Parts folks. I hope that since Lares has teamed up with these 3 parts suppliers that this may be an answer to our prayers to get this virtually impossible to find part for our Cs. It would certainly relieve pressure on our Reproduction Parts Committee to have these vendors supplying this pump (pardon the pun!) If anyone has purchased one of these pumps from these vendors please chime in on what the experience you have had with the pump performance. A standard to look at is a bench tested pressure output of at least 900 PSI for the real deal. Rob Kern

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang --- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group. To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx. To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/D73F715E-93B4-4D06-90EC-9825E30FD724%40sbcglobal.net.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
--- You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/086461EF96B945CBA051DD7CB007C3B5%40OwnerPC.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.