Re: {Chrysler 300} Lift advice
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Lift advice



Every so often NAPA dealers have access to some specials. I have a 4 poster (120v and mobile) purchased and assembled several years for about $3,500.00. I’m sure it’s made in China yet rated for 10,000 lbs. Plenty for my needs. 

Get Outlook for iOS

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> on behalf of Jarrod Hermann <jarrodhermann@xxxxxxxxx>
Sent: Tuesday, November 28, 2023 5:21:18 PM
To: ridgleyracing65 <ridgleyracing65@xxxxxxxxx>
Cc: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: Re: {Chrysler 300} Lift advice
 
I have 5 4 posts in my barn for car storage. 

Atlas brand. They are easy to move around with one person when they are on the casters. Sometimes back and forth but you can do it. Two people of course would be easier. But you should be able to do what you need to do. 

Unfortunately the prices have gone so far up! I paid like $2300 each back in 2021. 

Jarrod Hermann

On Nov 28, 2023, at 7:04 PM, ridgleyracing65 <ridgleyracing65@xxxxxxxxx> wrote:

My Advantage lifts are not bolted down. They come with a set of casters. You raise the lift about a foot and place the casters in position , then lower the lift which causes it to remain above the ground on the casters. However, it is really a two man operation to move and place the lift in position. It is very heavy and while rolling easily, it can have a "mind of its own" when it is moved.

Dyke Ridgley

On Tuesday, November 28, 2023 at 5:44:39 PM UTC-6 scotttaylorsc wrote:
  For those of you with four post lifts that are not bolted down, how hard are they to move around?  Can one person do it? 
  We have a new three car garage at the house and I’m considering a couple of four post ones for storage… most likely with Chryslers on the ground and something lighter up top.  
  I want something with an electric lift, would prefer no air but have air available if needed.  Thinking about two, four post models but I’d like to not bolt them down if possible.  

Scott 

On Mon, Nov 27, 2023 at 8:31 PM Tom Wilburn <tomwi...@xxxxxxxxx> wrote:
I want to purchase a lift, and would appreciate advice.

While my preference would be an asymmetric chassis lift for maximum accessibility, I also want to use the lift for car storage.

So, I think that means a “drive on lift”, with accessories to allow wheel removal etc.

Any recommendations? 

I have no restrictions as this will be new construction.

Tom

Sent from my iPhone

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-int...@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/9801416C-A8E4-48D9-8FA7-D7BBF59E6EE9%40gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/81279273-9d75-428d-9880-00bce53ce2a1n%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/4FDC4C5D-52F6-4C3F-BE92-2D68B64EB0DF%40gmail.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/PH7PR11MB7607CC05E0BD18AF0A74FBC1B883A%40PH7PR11MB7607.namprd11.prod.outlook.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.