Well,
Learn something new every day.
Turns out that the New Yorkers uses a different length torsion bar. Which means they used a different sub frame.
I thought the different part number in the master parts book was due to a different diameter. But it is both different in diameter and length. All the other front-end parts are the same according to the master
Parts Book.
Seems odd. The New Yorker bars are 44 inches long while the Newport and 300 are 40.
I guess I will eBay them at some point as they are of little use to me.
Thanks all for the measurements.
James
From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, January 17, 2024 08:07
To: Jamie Hyde <jamie.hyde@xxxxxxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} Re: Can someone do me a favor over the next few days... 1963-1964 Torsion Bars
Hi Jamie,
I am scratching my head. I will have to check the bars up at the house this weekend. I could have sworn that I measured them, and they were 44 inches long. Those bars cam out of a 1964 Chrysler New Yorker.
Is it possible that the New Yorker and the 300 used different length bars? Or was there a change to the subframe in 1964 from 1963 and the bars are longer?
I will also have to get under the 300K here in San Francisco on the cold wet concrete and see if I can get an in-car measurement.
Jamie, can you take a caliper and get me a very exacting OD on the 607 bar?
Thanks, James
James , the 607 bar out of my J is 40" long.
On Tuesday, January 16, 2024 at 11:32:49 AM UTC-5 James Douglas wrote:
If anyone has a set of torsion bars out and accessible for a 1963-1964 Chrysler, can you measure the length and note the bar number?
I have a paperwork conundrum. I have a set that came out of a 1964 New Yorker, and I thought I measured them, and they are 44 inches long. But my paperwork here in San Francisco
says that the bars for a1963 300J, and presumable the 1964 300K, are 40 inches long. Hence the conundrum.
Also, I am still hunting for a set of 606-607 bars and if anyone has a set, they will sell please let me know.
James
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/a2708d8c-6a80-4840-afb8-42fd479ff0dcn%40googlegroups.com.
--
For archives go to
http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit
https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61712BF52B697FECBD4CDB6693722%40CY5PR19MB6171.namprd19.prod.outlook.com.
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to
.
