Re: {Chrysler 300} Re: Can someone do me a favor over the next few days.
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: {Chrysler 300} Re: Can someone do me a favor over the next few days... 1963-1964 Torsion Bars



All Chrysler models in 1963 and 1964 had a 122" wheel base.


On 1/19/2024 9:22 AM, Cox Mail wrote:
Are New Yorkers long
Wheel base cars?
They have a totally different sub frame then
The shorter 122" sub frames.
Bob Haag

On Jan 19, 2024, at 9:16 AM, 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx> wrote:



Well,

 

Learn something new every day.

 

Turns out that the New Yorkers uses a different length torsion bar. Which means they used a different sub frame.

 

I thought the different part number in the master parts book was due to a different diameter. But it is both different in diameter and length. All the other front-end parts are the same according to the master Parts Book.

 

Seems odd. The New Yorker bars are 44 inches long while the Newport and 300 are 40.

 

I guess I will eBay them at some point as they are of little use to me.

 

Thanks all for the measurements.

 

James

 

 

 

From: 'James Douglas' via Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Sent: Wednesday, January 17, 2024 08:07
To: Jamie Hyde <jamie.hyde@xxxxxxxxxxxxx>; Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: RE: {Chrysler 300} Re: Can someone do me a favor over the next few days... 1963-1964 Torsion Bars

 

Hi Jamie,

 

I am scratching my head. I will have to check the bars up at the house this weekend. I could have sworn that I measured them, and they were 44 inches long. Those bars cam out of a 1964 Chrysler New Yorker.

 

Is it possible that the New Yorker and the 300 used different length bars? Or was there a change to the subframe in 1964 from 1963 and the bars are longer?

 

I will also have to get under the 300K here in San Francisco on the cold wet concrete and see if I can get an in-car measurement. 

 

Jamie, can you take a caliper and get me a very exacting OD on the 607 bar?

 

Thanks, James

 

 

From: chrysler-300-club-international@xxxxxxxxxxxxxxxx <chrysler-300-club-international@xxxxxxxxxxxxxxxx> On Behalf Of Jamie Hyde
Sent: Wednesday, January 17, 2024 06:26
To: Chrysler 300 Club International <chrysler-300-club-international@xxxxxxxxxxxxxxxx>
Subject: {Chrysler 300} Re: Can someone do me a favor over the next few days... 1963-1964 Torsion Bars

 

James , the 607 bar out of my J is 40" long. 

On Tuesday, January 16, 2024 at 11:32:49AM UTC-5 James Douglas wrote:

If anyone has a set of torsion bars out and accessible for a 1963-1964 Chrysler, can you measure the length and note the bar number?

 

I have a paperwork conundrum. I have a set that came out of a 1964 New Yorker, and I thought I measured them, and they are 44 inches long. But my paperwork here in San Francisco says that the bars for a1963 300J, and presumable the 1964 300K, are 40 inches long. Hence the conundrum.

 

Also, I am still hunting for a set of 606-607 bars and if anyone has a set, they will sell please let me know.

 

James

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/a2708d8c-6a80-4840-afb8-42fd479ff0dcn%40googlegroups.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB61712BF52B697FECBD4CDB6693722%40CY5PR19MB6171.namprd19.prod.outlook.com.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/CY5PR19MB6171D021BADB7084AB2EF56593702%40CY5PR19MB6171.namprd19.prod.outlook.com.
--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/441BF38A-51EF-4E5D-9325-3FA2833B80E7%40cox.net.

--
For archives go to http://www.forwardlook.net/300-archive/search.htm#querylang
---
You received this message because you are subscribed to the Google Groups "Chrysler 300 Club International" group.
To unsubscribe from this group and stop receiving emails from it, send an email to chrysler-300-club-international+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/chrysler-300-club-international/6bf2f025-0338-4a01-aff6-ec4444406325%40simplexco.com.


Home Back to the Home of the Forward Look Network Archive Sitemap


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.