Re: Right Angle Oil Filter Adapter Gaskets
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Right Angle Oil Filter Adapter Gaskets



I found the Mopar instruction sheet that came with a direct connection adapter I bought way back when.  You'll see a "nylon washer" that goes between the adapter and the threaded boss, and a "copper washer" that goes between the bolt head and the body of the adapter.  Both of these pieces can be found in a little bubble pack assortment of metric seals at O'Reilly's.  I thought sure I had noted the part number and brand of that package but can't locate it.  But it is about $6.99 for the package of 6 or 7 seals, and two of these are a copper washer and a nylon washer of the right sizes for the adapter.  If I get a chance in the next day or two, I'll try to take a look at my local store, I know right where they stock it locally as I've bought it twice recently for engine swaps needing the 90 degree adapter.  AND the base seal (works for the adaptor or for the standard direct fit filter adapter plate) is available from RockAuto as Mahle part number B31604 for $2.04.

Bill & Kathi Parker, South Central Indiana


On Thu, Aug 19, 2021 at 7:57 PM <glpavlovich@xxxxxxx> wrote:

Fel Pro gasket to block underneath the adapter plate is part #70522 and easily obtained from Auto Zone or OReilly.

Use 35ft.lbs. for adapter to block.

Gary P.

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx> On Behalf Of Bill M
Sent: Thursday, August 19, 2021 2:01 PM
To: 62-65 Mopar List <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: Re: Right Angle Oil Filter Adapter Gaskets

 

I tried to get the kit from Mancini, but them & EVERYBODY else were out of stock for some strange reason. My local dealer could find the part number, but their computer said it wouldn't be available until December 21st of this year.

 

 I'm going to keep digging until I find the Fel Pro gasket set part number as I think that would probably be about $9 or $10 tops.

 

Here's another related question... Does anybody know what the torque spec is for the filter adapter to the block? Been having difficulty finding that as well.

 

Thanks!

 

On Tue, Aug 17, 2021, 9:22 PM <glpavlovich@xxxxxxx> wrote:

Yes, a fair price.  I just installed my new gaskets and no leaks.

Gary Pavlovich

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx> On Behalf Of Bill Parker
Sent: Tuesday, August 17, 2021 6:11 PM
To: 1962to1965mopars@xxxxxxxxxxxxxxxx
Subject: Re: Right Angle Oil Filter Adapter Gaskets

 

I did not know about the Mancini kit that’s a decent bargain. 

 

On Aug 17, 2021, at 9:06 PM, glpavlovich@xxxxxxx wrote:



Bill M.

 

Yes, the Fel Pro gasket to oil filter plate to block is #70522 at Auto Zone for about $3.80 and the complete “Mopar right angle oil fiter adapter gasket set” is obtained from Mancini Racing

Superformance 90 Degree Oil Filter Adaptor Kit

Item #: SFP340-K5

Write a Review

Top of Form

Price: $14.99

Bottom of Form

Don’t get hosed online…go to Mancini for the complete gasket set…

Gary Pavlovich

 

From: 1962to1965mopars@xxxxxxxxxxxxxxxx <1962to1965mopars@xxxxxxxxxxxxxxxx> On Behalf Of Bill M
Sent: Tuesday, August 17, 2021 3:25 PM
To: 62-65 Mopar List <1962to1965mopars@xxxxxxxxxxxxxxxx>
Subject: Re: Right Angle Oil Filter Adapter Gaskets

 

Yes...I'm talking about a gasket set.. So I did search the Fel-Pro site but couldn't find it. Super tough to search by application though.

 

The Fel-Pro gasket I bought off eBay was ~$18...so not horrible $, but I'm sure if I find the FP#, it'll be even cheaper.

 

 

 

On Tue, Aug 17, 2021, 6:08 PM Bill Parker <hemirr@xxxxxxxxx> wrote:

Bill, do you mean a gasket set?  The big base gasket is the same as any oil filter base gasket on a small block. I have the number around here somewhere. The other seals, for under the head of the hollow bolt and for between the adapter and the boss where the hollow bolt is threaded into the block, can be found in a certain package of metric seals. Theres an eBay seller that has packaged these three pieces and sell them as a kit for 39.95. The cost to buy the stuff myself was about $11. I think I preserved the brand and number of that package of seals too I just need to look. Bought the package at oReillys and they can order the base gasket too but I bought some off rock auto. 

 

Also, there is an industrial specialty drilled bolt that substitutes for the original, and this can be found on eBay, and also another eBayer has had a repro manufactured. He claims the substitute isn’t as strong as the original and his is. I have one of each (only $5 difference in price) and the repro is really nice but the other one, while doesn’t look quite the same, does work fine, one of those is on a 360 I put into a ‘64 Dart for a guy last year. 



On Aug 17, 2021, at 5:40 PM, 'DAVID HURD' via The 1962 to 1965 Mopar Mail List Clubhouse <1962to1965mopars@xxxxxxxxxxxxxxxx> wrote:

Did you search felpro.com ?

David C Hurd

via iPhone



On Aug 17, 2021, at 2:08 PM, Bill M <y1topbanana73@xxxxxxxxx> wrote:



Does anyone know what the Fel-Pro part number for a right angle oil filter adapter is? I was unable to find a Mopar set and when I got a Fel-Pro set off ebay, the guy pulled the part number off the package. 

 

Thanks!


Bill M
65 Coronet 500 'vert http://goo.gl/6xUS1
73 Dart Sport, 05 Ram 2500 CTD, 4WD, QC, LB, Laramie
14 Avenger R/T, 15 Durango R/T, 21 Model T Depot Hack

--

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CANzadSGe7OSZC3O21z0Zg9M5PSc9LEc%2Bt0zoam-1wSCuDh7GYA%40mail.gmail.com.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/007f01d79556%240131dc90%24039595b0%24%40cox.net.

--
--
--
Please address private email -- email of interest to only one person -- directly to that person. That is, email your parts/car transactions and negotiations, as well as other personal messages, only to the intended recipient. Do not just press "reply" and send your email to everyone using the general '62-'65 Clubhouse public email address. This practice will protect your privacy, reduce the total volume of mail and fine-tune the content signal to Mopar topic. Thanks!
 
1962 to 1965 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html and http://www.1962to1965mopar.ornocar.com/general_disclaimer.html.
--
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
http://groups.google.com/group/1962to1965mopars?hl=en.
---
You received this message because you are subscribed to the Google Groups "The 1962 to 1965 Mopar Mail List Clubhouse" group.
To unsubscribe from this group and stop receiving emails from it, send an email to 1962to1965mopars+unsubscribe@xxxxxxxxxxxxxxxx.
To view this discussion on the web visit https://groups.google.com/d/msgid/1962to1965mopars/CAN5R1HQtZY88j7Cvw-MmKGT_abSRcXXgN_5cnkgjVbtXbqQwoA%40mail.gmail.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.