Re: Rear End pinion seal '63 Polara 500

[Jimmy Peavy <peaver63@xxxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
Get both the MiFi XM Satellite Radio and an Apple iPod for Free! 
caadeMlbOyW3Na/ProductTestPanel 
-------------------------------------------------------------------

I never had much luck using a 1/2" drive impact to remove the pinion 
yoke nut.It just doesn't hit hard enough.
I did try a 3/4" drive impact.
My compressor wouldn't run the 3/4" drive impact, but if yours will, a 
3/4" drive will break the nut loose.

  Jimmy .

  

Richard Kinsley wrote:

>  
>
> >    
>
>
> If you use an air impact socket to remove the yoke nut you don't need to 
> hold it. If you want to torque it putting it back together then you'd 
> have to hold it.
>
>
>  
>
> > >      
> >    
>
>
>
>  


[Non-text portions of this message have been removed]

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to 
reduce wrinkles by 68% Start your free trial today and pay only 
$5.95 for shipping & handling.
caadfBTbOyW3Nf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 


bOyW3N.