Rear brake wheel cylinders

[Brian Schlump <jsbs@xxxxxxxxxxxxx>]

[AD removed for archives]
-------------------------------------------------------------------
2-Day Tax Refund Loans TaxBrain Online Tax Service Get Started 
Now!
caadeMnbOyW3Na/TaxBrain
-------------------------------------------------------------------

Gary,

I failed to mention that when I swapped the '70 rear end into my '64 
Belvedere, I replaced the rear wheel cylinders.  The original '70 
cylinders were attached with 5/16" bolts.  I checked 5 different 
suppliers, and all the replacements used 1/4" bolts.  I ended up 
drilling and tapping a set of replacements to accept the 5/16" mounting 
bolts.  I found that the cylinders supplied by Scott Vadnais and NAPA 
had sufficient stock to do this, but some other suppliers' cylinders 
didn't...Brian

'64 Belvedere
Woodstock, IL.

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without painful injections with Nexiderm SP.
Nexiderm SP is clinically proven to reduce wrinkles by 68% Start 
your free 14-day trial today!
caadfBPbOyW3Nf/Nexiderm
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.