RE: '64 Sport Fury spinner wheel covers

[david_seibert@xxxxxxxxxxx]

[AD removed for archives]
-------------------------------------------------------------------
FREE Zoobooks Elephants ISSUE and tiger POSTER!
Is your child reading? Zoobooks is guaranteed to improve 
your child?s reading skills. Click below to sign up now!
caadCUzbOyW3Na/Zoobooks
-------------------------------------------------------------------

Doug, I had the same question.  The original set I have for my 64 Sport 
is not colored red, white and blue.  All sections are almost a pearl 
color.  Thought maybe the paint had worn off but at Carlisle last year 
an original owner of another 64 Sport confirmed that the hubs were not 
red, white, and blue as one might expect.  So I left mine as they were.  


Dave 

Douglas Sutherland wrote:
> 
> 
> Does anyone in the club have a wheel cover with the original 
> red/white/blue 
> hub inlays intact?
> 
> Is the attached photo correct?
> 
> I am restoring my wheel covers (keeping everything stock) and I have a 
> color 
> question.
> 
> If the valve stem hole is down and the Plymouth logo is upright, is blue 
> on 
> bottom, white on left and red on right?
> 
> These three insets appear to be aluminum "stickers" glued to the pot 
> metal 
> hub.? Was the original paint anodized aluminum (translucent color like 
> the 
> hub logo) or opaque color?
> 
> Have you had any luck restoring the painted flat black circle on the 
> stainless steel wheel cover circling the raised hub?
> 
> Thanks for your help!
> Doug
> 
> _________________________________________________________________
> Don?t just search. Find. Check out the new MSN Search! 
> http://search.msn.click-url.com/go/onm00200636ave/direct/01/
> 
> [Non-text portions of this message have been removed]
> 

[AD removed for archives]
-------------------------------------------------------------------
Get $1,000 to spend on groceries? any way you please. Click here!
caadAcAbOyW3Nf/GrocerySpree
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 



bOyW3N.