Re: gauges? drill bits?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: gauges? drill bits?



[AD removed for archives]
-------------------------------------------------------------------
Need a Laptop? Get a Sony Vaio Laptop Free!
caadHlxbOyW3Na/ProductTestPanel
-------------------------------------------------------------------

what you have is a number drill the # 42 is measures .0935 . number drills start at #1 which is .228
and goes up to #80 which is .013
mike
----- Original Message ----- From: "Robert neal zimmerman" <northwestweirdo@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Friday, July 22, 2005 11:58 PM
Subject: gauges? drill bits?



[AD removed for archives] ------------------------------------------------------------------- Get $1,000 to spend on groceries. any way you please. Click here! caadHlsbWaUDca/GrocerySpree -------------------------------------------------------------------

trying to do some adjustments on my carb from my shop manual.
  some measurements say  to insert a ( for example) 11/32 bit to
  measure a proper gap, OK, I can handle that -
   but then in other adjustment they might say  to insert a   #42.
  In one illustration they show one, a flat  blade type thing, and the
  guy is  inserting it between the choke plate and the air horn.
  what exactly are these numbered thingamajiggers called , and is there
  any simple conversion of  #'s into an sae measurement  so I dont have
  to go and buy a whole set of the above mentioned thingamajiggers.
 Neal Zimmerman, Eugene oregon

--
http://www.fastmail.fm - Same, same, but different.

[AD removed for archives]
-------------------------------------------------------------------
Get a Free Sirius Satellite Package, don't pass on this!
caadHlCbWaUDcf/ProductTestPanel
-------------------------------------------------------------------

----
Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks!


'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.

[AD removed for archives]
-------------------------------------------------------------------
Erase wrinkles without Botox! Nexiderm SP is clinically proven to reduce wrinkles by 68% Click here to get your 30-day free supply.
caadHllbOyW3Nf/Nexiderm
-------------------------------------------------------------------


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.


bOyW3N.









Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.