Turn Signal Wiring Harness Removal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Turn Signal Wiring Harness Removal




OK, I give up, and it has to be something really obvious.
Working on disassembly of my 64 Belvedere steering column...
how in the world do you remove the directional switch/horn wiring from the steering column jacket and or cover/housing assembly. Page 8-80 of the 64 Shop Manual says nothing about what appears to be a permanent situation at the connector end and up top at the switch end. The only solution appears to be cutting and then splicing the wires when we re-assemble the darn thing. That can't be right! Please advise, Donny, 64 Belvedere

_________________________________________________________________
The MSN Entertainment Guide to Golden Globes is here. Get all the scoop. http://tv.msn.com/tv/globes2007/


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.
This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. Or send an email to: 1962to1965mopars-unsubscribe@


http://www/?p=





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.