Re: Front suspension

[Don Hudson <mopar4me@xxxxxxxxxxx>]

You can't use either of the control arms but can use the spindle, caliper 
adapter, brakes etc.  In order to use tje disc brake set-up from your donor, 
you'll need to use the UCA's from a 73-76 A Body disc brake car.  Your 65 
lowers are fine.  Don't forget the rear if you're trying to go BBP.
Don
----- Original Message ----- 
From: "Gary" <gary@xxxxxxxxxx>
To: "62to65 mopar" <1962to1965mopars@>
Sent: Wednesday, January 10, 2007 11:45 PM
Subject: Front suspension


> Will the front suspension from an E-body fit on my 1965 Barracuda?  I can
> get everything from the K-member out. Control arms, Discs, calibers etc.
> Goal is to end up with bigger bolt pattern, and disk brakes.
>
> Thanks I advance.
>
> Gary L Matthews
> 1965 Barracuda project car
> 1965 Barracuda rust bucket donor car.
>
> Puyallup/Naselle Washington.
>
>
> ----
> Please address private mail -- mail of interest to only one person --  
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=