Re: Front suspension

[Doug Ahern <D170A833@xxxxxxxxxxxxxxxxxxx>]

On 45 01/10/07, Gary wrote:
> Will the front suspension from an E-body fit on my 1965 Barracuda?  I can
> get everything from the K-member out. Control arms, Discs, calibers etc.
> Goal is to end up with bigger bolt pattern, and disk brakes.

yes., except you can use the e-body control arms,.   use your original
65 A-body lower control arms and get some upper control arms from a
73-76 A-body with disc brakes or 10" drums  (anything 73 and later
except 9" drum UCAs).


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

http:///u/?.. 
Or send an email to: 1962to1965mopars-unsubscribe@


http:///?p=