Re: Max Wedge hood?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Max Wedge hood?



Is it just me or are this pictures not available to
everyone ? I keep getting the "web page not available"
and an invitation to "sign in"..
Bob Fortson
--- Robert <r.lane@xxxxxxxxxx> wrote:

> 
> We've been told a bit of history about how our 63
> came to have a 426 fitted 
> (originally a 361), but I don't think we were told
> anything about how the 
> hood came to have the bracing cut. I doubt it's off
> an original MW car but 
> the way it's cut looks the same as the real ones
> I've seen. Because it's a 
> late 62 car (ie before the lightweight/hoodscoop
> option) it's just the flat 
> hood without any holes cut, but I think the way the
> bracing is cut would be 
> the same as if it had the holes & scoop fitted.
> Anyway, here are some pics I took a couple of months
> ago of the 4 corners. 
> Some are clearer than others but are good enough to
> get the idea
> 
>
http://uk.pg.photos.yahoo.com/ph/rob426uk/album?.dir=/96descd&.src=ph&.tok=phOUtlGBTR1btla.
> 
> Hope they're of some use...
> 
> Robert
> 63 Polara 500
> England
> 
> 
> ----- Original Message ----- 
> From: "Jason Chance" <j23@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Saturday, April 14, 2007 1:42 AM
> Subject: Re: Max Wedge hood?
> 
> 
> >
> > They did cut out the ribs. It had just a great big
> smooth underside with 
> > the two holes. The ribs were cut fairly close to
> the edges of the hood.
> >
> > I think the 'home plate' thing your talking about
> was later, on the hemi 
> > versions you got the plate with holes for the
> stacks and the seals that 
> > came in the trunk. The hood on those just had a
> huge hole to fit the 
> > diagonal chrome hemi air cleaner. The plate would
> go over this hole (with 
> > the seals) if you removed the big air cleaner and
> ran the stacks.
> >
> > Jason
> >
> >
> >
> > Jim Altemose wrote:
> >
> >> What did the underneath of a real Max Wedge hood
> look like?
> >> Particularly, a 63 Dodge, but I'm curious about
> all.  I've seen two
> >> holes where the air cleaners are.  I've also seen
> a 'home plate' kind
> >> of shape.  Was the cutout reinforce, or did they
> just cut out the
> >> ribs?
> >>
> >> - Jim
> >> Jim Altemose, Long Island, NY
> >> '63 Polara 500 (Max Wedge), '65 Belvedere I
> (Street Wedge), '71 Bronco
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.