Sean B wrote: > > Maybe, George. The grounds were my first guess, so I replaced them. > The bulkhead connectors are a good place to start, as I see there is > some melting there. I think I'll cut them all out and start fresh. > I'll keep you guys posted. > > Sean > > > george smith wrote: > > > > Possibly the connection at the bulkhead connectors > > Sean? --------------------------------------------------------------------- Those bulkhead connectors can be a problem. I think it's the bottom left wire on the connectors that fries and causes a loss of electrical power. I'd think it'd be continual once it happens though. It should cause all power to go off too I think. Look up that recently mentioned electrical site and they have the fix in detail. Rich Kinsley '64 Polara 4 dr 318poly w/goodies ---- Please address private mail -- mail of interest to only one person -- directly to that person. I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic. Thanks! '62 to '65 Mopar Clubhouse Discussion Guidelines: http://www.1962to1965mopar.ornocar.org/mletiq.html.