RE: Rear tapered axles/ brakes

[Don Owen <d4owe9@xxxxxxxxxxx>]

As mentioned to Bill in his post, "Fearing the Worst", be sure to thoroughly 
check your axle hubs after you  eventually win the battle in removing the 
darn things. As for that battle, mine went on for several weeks when 
removing the left rear drum/hub assembly. As earlier mentioned, you have to 
fire up the acetylene, and your puller needs to be heavy duty and absolutely 
centered.
Go ahead and bang the devil out of it while your brave buddy applies the 
heat to the center of the drum and the five wheel stud holes. Make sure he 
stands clear of the drum as they sometimes do more than just "pop" off. 
You'll get it eventually! Good Luck, Donny, 64 Belvedere.


> From: Kevin Merkley <krmerkley@xxxxxxxxx>
> Reply-To: 1962to1965mopars@xxxxxxxxxx
> To: 1962to1965mopars@xxxxxxxxxx
> Subject: RE: Rear tapered axles/ brakes
> Date: Mon, 13 Aug 2007 15:54:28 +0000
>
> Hi,
>
> The drum does separate from the hub.  Once you get them off, clean up
> the holes and they won't stick ever again on the hub.
>
> K.
>
> bschleic57@xxxxxxx wrote:
> >
> >
> > so take off the puller, put lug nuts back on and tap on the studs with a
> > hammer?? I thought the '64 and older tapered axles has one-piece hub and
> > drum??
> >
> >
> > -----Original Message-----
> > From: Kevin Merkley <krmerkley@xxxxxxxxx>
> > To: 1962to1965mopars@xxxxxxxxxx
> > Sent: Mon, 13 Aug 2007 10:14 am
> > Subject: RE: Rear tapered axles/ brakes
> >
> >
> >
> >
> > Hi,
> >
> > The drum can be separated from the hub.  Tap in a few of the studs and
> > the drum will loosen.
> >
> > The drum is the same as the newer Diplomats and such.
> >
> > K.
> >
> > bschleic57@xxxxxxx wrote:
> > >
> > >
> > > My 63 Fury has a leaking LR wheel cylinder.? I have them on the shelf
> > > new and the lines are replaced with SS, so I pull off the wheel, 
> attach
> > > my trusty (rusty) wheel puller and whack away on the turn piece.? it
> > > tightens up but drum is still firmly attached.? a little heat.? 
> nothing.
> > >
> > > plenty of PB Blaster nothing.?
> > >
> > > Yes i remembered to back off the self adjusters.? The nut was on 
> plenty
> > > tight, maybe someone used an air wrench and not torque wrench.
> > >
> > > Any thoughts, wisdom or condolences?
> > >
> > > WHS
> > > 
> ________________________________________________________________________
> > > AOL now offers free email to everyone.  Find out more about what's 
> free
> > > from AOL at AOL.com.
> > >
> > > [Non-text portions of this message have been removed]
> > >
> >
> >
> >
> > Kevin R. Merkley
> > Thunder Bay, Ontario
> > 64 Dodge 440 2dr HT (Cdn)
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --
> > directly
> > to that person.  I.e., send parts/car transactions and negotiations as
> > well as
> > other personal messages only to the intended recipient, not to the
> > Clubhouse
> > public address. This practice will protect your privacy, reduce the
> > total volume
> > of mail and fine tune the content signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> >
> >
> > ________________________________________________________________________
> > AOL now offers free email to everyone.  Find out more about what's free
> > from AOL at AOL.com.
> >
> > [Non-text portions of this message have been removed]
> >
>
>
>
> Kevin R. Merkley
> Thunder Bay, Ontario
> 64 Dodge 440 2dr HT (Cdn)
>
>
> ----
> Please address private mail -- mail of interest to only one person -- 
> directly to that person.  I.e., send parts/car transactions and 
> negotiations as well as other personal messages only to the intended 
> recipient, not to the Clubhouse public address. This practice will protect 
> your privacy, reduce the total volume of mail and fine tune the content 
> signal to Mopar topic.  Thanks!
>
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html.

_________________________________________________________________
More photos, more messages, more storage?get 2GB with Windows Live Hotmail. 
http://imagine-windowslive.com/hotmail/?locale=en-us&ocid=TXT_TAGHM_migration_HM_mini_2G_0507


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 

This email was sent to: arc.6265@xxxxxxxxxxxxxx

u/?bUrDWg.bSONJP.YXJjLjYy



?p=TEXFOOTER