Trans
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Trans



Most all 727s that I have ever worked with hold 9 qts including the TQ.  I alway jack up the back of the car so the rear wheels are of the ground.  Then start filling up the trans.  Install 5 or 6 qts then start the car and let it run a little bit.  Add more fluid Start car and engage the trans  at low idle and go thu the gears.  Check the fluid and add as needed.  Then makes sure that the trans has fluid where it is suppose to be.  This way you are not putting a heavy load on the trans untill it is full.   Just my way of doing it.  Gary


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.