'65 wiring harness?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

'65 wiring harness?



Hi guys, it's been a while since I've been here.  

Finally decided after about 10 years to fix the electrical gremlins in 
the 'vert.  After doing a thorough inspection, I've discovered my wiring 
harness is shot.  Old, crumbly, burned, worn in various places.  Rather 
than cobble something together, I'd rather just find a replacement.  
Other than the Mopar Performance electronic ignition, its' stock, so it 
shouldn't be rocket science.  This is from the firewall to the engine.  
   I looked on the Year One site and they have a couple of generic '65 
Dodge B body harnesses.  Should I go for the HU24, which is original?  
Or the HU24M, which is configured for the later (1970+) voltage 
regulator and alternator.  The alternator is fine, but I wouldn't 
necessarily mind upgrading it after 40 years.  Any suggestion for a new 
coil, as well?  This is a stock 361, so I'm not looking for ultimate 
high performance, just a dependable driver.
   And is there a source besides Year One?  I have nothing against them, 
but if there is something better, please let me know.  Thanks
   TP


Tony Puig
Mountain View, CA
'65 Coronet 500 'vert
tpuig@xxxxxxxxxxxxx


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.