Re: Rhetorical question - any ideas besides a heat wrench?

[george smith <bt6t4@xxxxxxxxx>]

Just remember you'll have a lot of heat ransfer. If
the LCA bushings will be replaced you won't worry
about them. However,some heat will/might get to the
torsion bars and they should never see that kind of
heat or damage can occur.On the off chance a cheater
bar is used,keep in mind that bolt could break.
--- Don Hudson <mopar4me@xxxxxxxxxxx> wrote:

> 
> An ancient scientists (Archimedes??) once said with
> a long enough lever 
> he could move the world.  Extra long breaker bar
> ought to do it.
> 
> neal zimmerman wrote:
> > Once in a similar situation i just lengthened my 
> breaker bar with
> > about an 8 foot section of pipe, the old Polish
> torque wrench. it
> > came right off.  if u have room to do that try it.
>  make sure u are
> > set up firmly on jackstands.
> >   neal zimmerman, eugene oregon
> >
> >
> >
> >   
> 
> 
> ----
> Please address private mail -- mail of interest to
> only one person -- directly to that person.  I.e.,
> send parts/car transactions and negotiations as well
> as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This
> practice will protect your privacy, reduce the total
> volume of mail and fine tune the content signal to
> Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
>
> 
> 


George



      ____________________________________________________________________________________
Be a better friend, newshound, and 
know-it-all with Yahoo! Mobile.  Try it now.  http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.