Re: Sure Grips
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Sure Grips




If that article is correct Tony the answer is no. All sure grips and all 64 and newer open rear ends have the same size thrust blocks. It's only the pre '64 open rear ends the are "supposed" to have a different size thrust block.

Dan


----- Original Message ----- From: "tony narducy" <arnsr@xxxxxxxxxxx>
To: <1962to1965mopars@xxxxxxxxxx>
Sent: Sunday, May 11, 2008 9:12 PM
Subject: RE: Sure Grips



In regard to the sure grip units from the early 60's with the spleened axels
if you use that center section in the 65 and up rear ends, do  you have to
do any modifications to the axels?

Tony
62 Plymouth Fury 64 Polara


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html.












Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.