Re: Timing Problem!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Timing Problem!



There is no outer ring. It's a solid ATI balancer.
On Thu, 29 May 2008 09:14:01 -0700, "65" <65Val@xxxxxxxxx> said:
> 
> Sounds like the outside ring on the balancer has slipped. Will the engine 
> run normally at the 50* setting, ie no ping? If so, the slipped outer
> ring 
> would be my guess.
> 
> Darwin/Victoria BC/Canada
> '65 Cdn.Val.Custom 100 'vert
> 225/factory A833....eternal project
> 
> '67 Dart GT 'vert...
> 273/904...now with "Collector" status
> 
> http://s41.photobucket.com/albums/e285/65val/
> 
> ----- Original Message ----- 
> From: "William Cole" <wedge64@xxxxxxxxxxx>
> To: <1962to1965mopars@xxxxxxxxxx>
> Sent: Thursday, May 29, 2008 5:32 AM
> Subject: Timing Problem!
> 
> 
> >
> > Gentlemen,
> > We have a 383 motor with Edelbrock alum. heads, alum. manifold, BG
> > Demon carb, Mallory ignition, and a Mopar .533 cam, and an ATI dampner.
> > When trying to time it with two different timing lights, it shows 50
> > degrees at idle. If we try to bring it back to initial timing around 12
> > to 14 degrees, the motor won't run. If you try to total time it at 2500,
> > the timing marks keep advancing more. Can't figure out why we can't time
> > it at idle or total time it.
> > The timing marks on the crank and cam are right so what do you think is
> > wrong and causing this? It also won't idle slower than around 1200 at
> > idle and going into gear it stalls the motor. Checked for vacuum leaks
> > and found none. Any ideas?
> >
> > Bill C.
> > -- 
> >  William Cole
> >  wedge64@xxxxxxxxxxx
> >
> > -- 
> > http://www.fastmail.fm - A fast, anti-spam email service.
> >
> >
> > ----
> > Please address private mail -- mail of interest to only one person --  
> > directly to that person.  I.e., send parts/car transactions and 
> > negotiations as well as other personal messages only to the intended 
> > recipient, not to the Clubhouse public address. This practice will protect 
> > your privacy, reduce the total volume of mail and fine tune the content 
> > signal to Mopar topic.  Thanks!
> >
> > '62 to '65 Mopar Clubhouse Discussion Guidelines:
> > http://www.1962to1965mopar.ornocar.org/mletiq.html.
> >
> > 
> 
> 
> ----
> Please address private mail -- mail of interest to only one person --
> directly to that person.  I.e., send parts/car transactions and
> negotiations as well as other personal messages only to the intended
> recipient, not to the Clubhouse public address. This practice will
> protect your privacy, reduce the total volume of mail and fine tune the
> content signal to Mopar topic.  Thanks!
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines:
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
-- 
  William Cole
  wedge64@xxxxxxxxxxx

-- 
http://www.fastmail.fm - One of many happy users:
  http://www.fastmail.fm/docs/quotes.html


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.