Re: 383 Advice
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: 383 Advice



Definitely TTI's I agree that they make a Quality Product.I', leaving the Cam that's in it already,it lopes pretty good and make good torque..Just dont know whether to run a 750 or larger? DP or a Vacuum Sec? 

--
Marcus"Hot Rod"Edell-The RevTones www.myspace.com/revtones www.revtones.net 

-------------- Original message -------------- 
From: Joey <jake4@xxxxxxxxxx> 

> 
> I have TTI's on my Dodge and although they are pricey you can't beat the 
> fit, My vote would go for Holley, I am no fan of Demon carbs, maybe call Cam 
> Motion for a cam recommendation, we use their stuff in our super stocker 
> with good results. 
> 
> Good Luck! 
> Joey 
> ----- Original Message ----- 
> From: "Marcus Edell" 
> To: <1962to1965mopars@xxxxxxxxxx> 
> Sent: Sunday, June 29, 2008 10:52 AM 
> Subject: 383 Advice 
> 
> 
> > 
> > Hey Guys, 
> > I have a 383 in my 62 Polara 500 it runs a .484 Cam,Mopar Dual Plane 
> Intake,stock exh manifold,Mallory ign,Edelbrock 600CFM,Stock heads. 
> > I was going to build a Big Block Stroker, but now I'm thinking I will 
> Leave the 383 in it and build it up a little.The rear axle is a 3.91 Sure 
> Grip,SS Springs,pinion snubber,SS Shocks. 
> > I was thinking of a Bolting on a Holley or Demon carb, Headers and 
> Edelbrock Heads.Any Advice? 
> > 
> > -- 
> > Marcus"Hot Rod"Edell-The RevTones www.myspace.com/revtones 
> www.revtones.net 
> > -- 
> > [Non-text portions of this message have been removed] 
> > 
> > 
> > ---- 
> > Please address private mail -- mail of interest to only one person -- 
> directly to that person. I.e., send parts/car transactions and negotiations 
> as well as other personal messages only to the intended recipient, not to 
> the Clubhouse public address. This practice will protect your privacy, 
> reduce the total volume of mail and fine tune the content signal to Mopar 
> topic. Thanks! 
> > 
> > '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> > http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> > 
> 
> 
> ---- 
> Please address private mail -- mail of interest to only one person -- directly 
> to that person. I.e., send parts/car transactions and negotiations as well as 
> other personal messages only to the intended recipient, not to the Clubhouse 
> public address. This practice will protect your privacy, reduce the total volume 
> of mail and fine tune the content signal to Mopar topic. Thanks! 
> 
> '62 to '65 Mopar Clubhouse Discussion Guidelines: 
> http://www.1962to1965mopar.ornocar.org/mletiq.html. 
> 
> 
--
[Non-text portions of this message have been removed]


----
Please address private mail -- mail of interest to only one person -- directly to that person.  I.e., send parts/car transactions and negotiations as well as other personal messages only to the intended recipient, not to the Clubhouse public address. This practice will protect your privacy, reduce the total volume of mail and fine tune the content signal to Mopar topic.  Thanks!

'62 to '65 Mopar Clubhouse Discussion Guidelines:
http://www.1962to1965mopar.ornocar.org/mletiq.html. 













Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.